中文 
Product Categories
Product Selection
ResetManufacturers
Resistant Concentrator Systems CentriVap
Centrifugal concentration
Contact
Resistant Concentrator Systems CentriVap
Temperature : -4℃~ 100℃ (adjustable)
Cold trap system : -50℃, -84℃, -105℃
Introduction：
● Epoxy coated metal frame with thermoplastic injection molding control panel;
● Glass cover, with safety sensor cover automatic locking mechanism;
● Compressor refrigeration, the sample temperature can be controlled from -4℃ to 100℃;
● Phenol-free upper cover gasket
● Epoxy coated aluminum ventricle
The microprocessor controls the 300W heater (located at the bottom of the centrifuge chamber), which can be heated to 10 ° C with an accuracy of 1 ° C
● Microprocessor control program, rotor rotation time and heating time can be set respectively: from 1 minute to 999 minutes, you can choose whether to preheat, precooling function. Can store 9 programs. Optional: 300W microprocessor control surrounding heating belt;
●LCD display: program number, temperature, setting and actual remaining heating time, remaining running time and the operation status of the optional peripheral heating belt;
● Equipped with three "one-button" quick start buttons, the speed of the carbon-brushless centrifugal motor can reach 1725rpm;
● Automatic vacuum release valve;
● Quick stop system, can stop the vacuum pump in a few seconds, and guide the gas into the centrifugal chamber and stop the rotor rotation;
● Built-in vacuum delay image, vacuum after the speed reaches the preset value;
● Sound prompt after running;
● Optional: vacuum pump, CentriVap cold trap, rotary head, 300W surrounding heating belt.
Compare This Product